Nanoporous activated carbon cloth for capacitive deionization of aqueous solution

Activated nanostructured-carbon cloths with a high ratio of surface area to volume are used as electrode for capacitive deionization. The electrochemical properties on capacitive deionization for NaCl solution have been investigated to improve efficiency of capacitive deionization properties from aqueous solution, employing chemical surface-modification by etching in alkaline and acidic solution. The removal efficiency of inorganic salts of activated carbon cloths by chemical modification significantly increased. Specially the carbon cloth surface modified in HNO₃ showed an effect of improvement in the CDI efficiency due to not only ion adsorption by an electric double layer, but also electron transfer by Faradaic reaction.     

Kinetic study of the reaction between molybdenum trioxide and gaseous carbon tetrachloride

The kinetics of the chlorination reaction of molybdenum trioxide with gaseous carbon tetrachloride has been studied at temperatures between 713 and 753 K. The effects of temperature, reaction time, residence time and gaseous reactant concentration on conversion were studied throughout the reaction. In all cases, there was an increase in conversion when the above operating variables were increased. The kinetic model proposed is consistent with and correlates the experimental data. In the range studied for the different variables, the step that controls the rate of reaction is the surface chemical reaction. Values of the rate constant and the activation energy were estimated.     

Process conditions for separating fatty acid esters by supercritical CO2

The solubilities of ethyl palmitate, ethyl oleate, ethyl eicosapentaenoate (EPA) and ethyl docosahexaenoate (DHA) in supercritical carbon dioxide were determined by a continuous flow method. The solubilities of fatty acid ethyl esters increased with pressure and decreased as the temperature was increased. An empirical equation, similar to Chrastil's equation, was used to describe the relationship between solute solubility and the density of carbon dioxide. The empirical equation was further used to qualitatively estimate the separation efficiency of isolating EPA and DHA ethyl esters from fatty acid esters. The operating conditions yielding high solubility gave fast extraction rate but resulted in low separation efficiency. Experiments were conducted to separate ethyl EPA and ethyl DHA from a model mixture containing four fatty acid ethyl esters and from esterified squid visceral oil. The experimental data compared closely with the calculated values.     

东营凹陷古近系烃源岩超压特征及分布规律

统计分析1307口探井实测压力系数和83l口探井使用的钻井液密度数据，发现东营凹陷古近系沙三段、沙四段普遍存在异常超压，超压(压力系数1．1-1．5)主要出现在2100-3500m深度，强超压(压力系数大于1．5)主要出现在2800-3500m深度。东营凹陷沙三段、沙四段主力烃源岩超压平面分布具有北高南低、东高西低的总体特点，超压主要分布在洼陷带、断裂构造带和中央背斜带上。烃源岩压力系数等值线北部陡坡带比较密集，南部缓坡带相对稀疏。生油洼陷中心附近异常高压带的分布与生油洼陷基本一致，洼陷深陷区压力系数很大，向周围斜坡和构造高部位呈辐射状逐渐减小至正常，压力分布带与洼陷、边缘斜坡和构造较高部位的欠压实与压实带发育、分布规律的一致性很好。图3表l参9     

Understanding chemical reactions between carbons and NaOH and KOH: An insight into the chemical activation mechanism

Direct mixing of an anthracite with hydroxides (KOH or NaOH) and heat treatment up to 730 °C has shown to be a very good activation procedure to obtain activated carbons with very high surface areas and high micropore volumes. The reactions involved during the heat treatment of these hydroxide/anthracite mixtures have been analysed to deep into the fundamental of the knowledge of this chemical activation process, that has not been studied before. For this purpose, the present paper analyses the drying process, the atmosphere during the carbonisation, the chemical state of the activating agents (NaOH, KOH and Na₂CO₃) and the chemical reactions occurring during the heat treatment which have been followed by FTIR and TPD. The analysis of our results allows us to conclude that steam is a good atmosphere for the carbonisation process, alone or joined with nitrogen, but not as good as pure nitrogen. On the other hand, during the activation process, the presence of CO₂ should be avoided because it does not develop porosity. The reactions, and chemical changes, involved during this chemical process are discussed both from a thermodynamical point of view as well as identifying the reaction products (H₂ by TPD and Na₂CO₃ by FTIR). As a result, this paper helps to cover the present lack of understanding of the fundamentals of the reactions of an anthracite with hydroxides which are necessary to understand the activation of the material.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

An investigation of carbon nanotube jet grinding

Since their observation in 1976 and 1991, carbon nanotubes (CNTs) have generated much interest due to their properties and potential applications. CNTs are tubular carbon molecules with remarkable mechanical, electrical, chemical and thermal properties, which make them useful in various applications. Industries producing CNTs via the fluidized bed chemical vapor deposition technique face challenges related to the size of CNT bundles. The two main challenges are agglomeration and agglomerate size distribution control. A solution to these challenges involves the use of jet mills to grind the CNT agglomerates. The goal of this study was to determine whether the nanotubes could be ground with air jets using a commercial jet mill and apply a two-parameter model to describe the grinding process. The present study has indicated that air-jet grinding of CNTs is feasible with a typical commercial jet mill. This paper presents the effect of operational parameters on the arithmetic mean diameter of the ground product. Sonic velocity through the grinding nozzles was required to obtain reasonable grinding rates and relatively narrow particle size distributions. This occurs at high air to solids feedrate ratios. Additionally, a simple attrition model can describe the grinding process in the spiral jet mill.     

Batch cultures of Penicillium camembertii on glucose and amino acids—model for growth and ammonium production

BACKGROUND: Three groups of amino acids were previously characterized based on their ability to be assimilated as carbon source by Penicillium camembertii. To describe the diauxic growth recorded on glucose and amino acids from the second group, such as arginine, an unstructured model was previously developed, based on the sequential consumption of both carbon substrates, glucose, followed after its exhaustion, by arginine. The model was modified to describe also the behaviour recorded during growth on other amino acids. RESULTS: The growth model involved the carbon substrate consumption (Verlhust model) and the biomass on carbon substrate yield. Glucose was therefore considered during P. camembertii growth on nitrogen source amino acids (lysine—first group); and amino acid consumption was considered during growth on carbon source amino acids (glutamate—third group), with glucose being dissimilated only for energy supply. The excess nitrogen from amino acids was released as ammonium; the linking of this production to growth was found to increase with the ability of the amino acid to be assimilated as carbon source by P. camembertii. CONCLUSION: The various metabolic behaviours recorded during P. camembertii growth on amino acids, in the presence of a primary carbon source such as glucose, were proved to be satisfactorily described by the model, showing the robustness of the model. Copyright © 2007 Society of Chemical Industry     

茨21-133井CO2吞吐技术初步试验

茨榆坨油田茨13块原油属于普通稠油，1993年开始蒸汽吞吐采油，从第二轮开始效果明显变差，注汽返排率低，有效周期短，产量下降快，套管变形井增多。针对这些问题，在该区块茨21—133井进行CO2吞吐采油工艺现场试验，获得成功，增油效果明显。